 |
Burner used in
our boiler is practically suitable for all applications. Depending on our
customer's requirements, either a pressure jet type or rotary cup
burner can be usedto fire different types of fuel used such as liquid fuel
from standard diesel oil to a higher viscosity heavy oil, Liquidify Petroleum
Gas (LPG), or even waste processed gas.
|
A dual combustion system, with either
simultaneous or sequential firing can be installed onto the system. In order to
achieve the highest efficiency with the lowest projected cost possible, an
optimal combination of the burners and the fuels are hence
selected.
|
A float and electrode types of Water
Level Controller are use in our boiler providing a set of protection stages for water
level. Special version of the controllers can be used to modulate the water input in order
to maintain the water level inside the boiler. Water level gauges used are the reflex glass
type to facilitate an easy reading.
|
 |
 |
Control system
is ranging from the conventional relay version for a small boiler to a more advanced
Distributed Control System (DCS) for a larger boiler. The DCS can be further used to
control the Total Dissolved Solids (TDS)of the water as well as modulate the boiler
operation.
|
DCS can also control and monitor the boiler house periodically
and providing information such as the boiler condition, calculate the boiler's efficiency and
troubleshooting that can be read by a windows based program.
|
Three element controls
is an ultimate special feature of our boiler control system that is able to monitor
the steam output and consequently modulate the feed-water input as well as the
burner's output to ensure a maximum boiler efficiency and an optimal
steam quality.
|
 |
 |
TDS Control To reduce water's Total Dissolved Solid (TDS) by reducing
scaling process inside the boiler.
|
Request for more information
Home |
Products |
About Us |
Guest Book |
Contact Us |
Site Map
|
