Boilers Non-Solid Fuel Teha ThermOil Heat Recovery Steam Generator Solid Fuel Heat Exchanger Pressure Vessel Autoclave Incinerator Services TEHA THERMOIL Thermal Oil Heaters In the region of which oil or gas is significantly cheaper than electricity, thermic fluid heating would be a cost effective solution. Our Teha Thermoil ranges from 600,000 kcal/hr up to 2.5 x 106 kcal/hr. Larger capacity will be customized accordingly. Advantages: Allows high process temperatures at low operating pressure and improves productivity. System efficiency as high as 87% (even better than steam heating). Significant cost reduction over electrical heating. Ideal for locations with poor water quality: no need for water treatment (as with steam heating). Standard Specification Parameters Units TH-06 TH-10 TH15 TH-20 TH-25 Heater output (MCR) Kcal/hr 600,000 1 x 106 1.5 x 106 2 x 106 2.5 x 106 Thermic fluid pressure Kg/cm³ 1:45 available at heater outlet mlc (20) Thermic fluid flow rate M³/hr 36 75 110 120 150 Thermic fluid outlet temp. (max) °C 280 300 Thermic fluid temp. rise T °C 35 28 28 28 28 Fuel Consumption on NCV basis               LDO/HSD kg/hr 69.0 110 165 220 275   FO/LSHS kg/hr   120 180 240 300   Natural Gas nm³/hr 80.0 140 208 277 346 Thermal efficiency on NCV @ MCR FO/LSHS/ LDO/HSD 85 ± 2 87 ± 2 % Thermal efficiency on NCV @ MCR Natural Gas 85 ± 2 % Electrical Load connected               Circulation pump kW   11.2 15 18.5 37.5   Blower kW   3.7 3.7 5.5 7.5   Fuel Pump kW   0.75 0.75 1.1 2.2   Fuel Pre - heater kW   9 12 15 18 Request for more information Home | Products | About Us | Guest Book | Contact Us | Site Map